Taylor Thermometer, Precision Thermocouple

Product details

Quick response. High accuracy. Water resistant. Super fast response. Temperature Range: -40 degrees F to 572 degrees F/-40 degrees C to 300 degrees C. Response Rate: greater than 6 seconds. Complete instructions & warranty enclosed. 2 AAA battery included. Taylor - accuracy 1st. Est. 1851. For warranty information please call 1.866.843.3905 or visit us online at: taylorusa.com. 2 AAA Battery Included. taylorusa.com. Printed with soy ink. FSC - Mix. paper from responsible sources. www.fsc.org. Printed with soy ink. Made in China.

Warning

Important: This thermometer is meant to track food temperatures periodically throughout the process, it is not oven safe and cannot be left in food during cooking. Caution: Remove food from oven or cooking surface before inserting thermometer. Do not touch stem with bare hands when hot. Do not leave in oven or grill.

Additional info

Note: there is a static cling label over the digital display and a strip under the battery door to prevent battery drain during shipping. Please remove both before use. How to Use: 1. Remove food from oven or cooking surface before inserting thermometer. Unfold the probe to turn on the thermometer. 2. Insert the thermometer into the food at least 1 inch, the temperature will stabilize quickly due to the thermocouple technology 3. Hold Feature: When the digital display has stabilized and the red backlight is still activated press the hold button and the temperature will be locked for viewing after removing the stem from the food (the word hold will appear). Press again to release and return to active monitoring. 4. Clean probe after use and fold to turn off before storage. 5. Backlight Feature: A red backlight will illuminate for approximately 60 seconds when the probe is unfolded to turn on the thermometer. Manually turn on the backlight for additional time by pressing the hold button. Battery Information: Before use, the battery door must be opened to remove the insulation tab that prevents battery drain during shipping. Using a small screwdriver, loosen the four (4) screws just enough to be able to gently lift the battery door being careful not to pull out the waterproofing gasket. A clear tab will be in the compartment. Remove completely and make sure batteries are fully inserted and making contact. Test thermometer function by pressing the power button before closing the door. Reposition battery door aligning notches and tighten screws until the door is flush with the back housing. See instruction manual for full battery replacement details for when readings grow dim or the low battery indicator comes on. Cleaning and Care: This thermometer has been designed to be water resistant (IP65) for easy cleaning and disinfecting between uses. Please read instruction manual carefully for additional information. Do not wash in a dishwasher.