This is the main content.
STP Brake Fluid, Heavy Duty, Dot 3
STP Brake Fluid, Heavy Duty, Dot 3
{{ slotProps.actionTitle }}
Product details Protects brake systems. For DOT3 ABS, disc and drum systems. Works with all brake systems requiring DOT3 fluids. STP Heavy Duty Brake Fluid DOT3 is scientifically engineered for optimum performance, for all ABS, disc or drum brake systems in today's cars and trucks to help: Provide protection against brake failure from vapor lock. Prevent corrosion in brake systems. Minimum wet boiling point 284 degrees F (140 degrees C). Works with all brake systems requiring DOT3 fluids. This is a DOT3 motor vehicle brake fluid. Exceeds Federal Motor Vehicle Safety Standard No. 116. Meets SAE Spec. J1703. www.stp.com. Questions? 1-888-G04-STP1 in the U.S.A. www.stp.com. Made in USA for Energizer Auto, Inc.

Warning

Warning: Cancer & reproductive harm. www.p65warnings.ca.gov.,First Aid: Eye Contact: Immediately flush eyes with large amounts of water for 20 minutes. Get immediate medical attention. Skin Contact: Wash with soap and water. Ingestion: Do not induce vomiting. Immediately call a physician or Poison Control Center. Contains trimethylene glycol monobutyl ether, diethylene glycol and other glycols and glycol ethers.,Warning: Harmful if swallowed. Eye irritant. See warning on back label. Caution: Do not refill container and do not use for other liquids. Danger: Keep out of reach of children and pets. Harmful if swallowed. Causes eye burns. Prevent contact with the eyes. Avoid skin contact. Wash hands after use. DO not ingest.

Additional info
Directions: Clean all dirt from around cover on master cylinder before removing. Fill unit to level specified by manufacturer. Replace cover. Check fluid level once a month. To Bleed System: Refer to service manual. Do not reuse brake fluid from bleeding operation. Avoid spilling brake fluid on brake lining or car finish. Follow vehicle manufacturer's recommendations when adding brake fluid. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. Store brake fluid only in its original container. Keep container clean and tightly closer to prevent absorption of moisture.