Iron Out Rust Stain Remover | Publix Super Markets

Iron Out Rust Stain Remover

Product details

Best on rust! Bathroom. Water softener. White laundry & more! Product settles; sold by weight, not volume. Contains no phosphates. Safe for septic tanks. Performance Guaranteed: If not satisfied with product performance mail register receipt along with UPC to Summit Brands for a full refund. HE: For all washers. www.summitbrands.com. For helpful tips, periodic offers and information on the family of Out products visit: www.summitbrands.com. For more ingredient information visit: www.summitbrands.com. 1-888-476-6688 Mon.-Fri. 8-5 EST. Packaging is recyclable. Made in the U.S.A.

Warning

First Aid: If in eyes, flush with water for 15 minutes and get immediate medical attention. In on skin or clothing, flush thoroughly with water. If irritation persists, get medical attention. If ingested, do not induce vomiting. Call a Poison Control Center (1-800-222-1222) or doctor immediately for treatment advice.,Caution: Eye & skin irritant. Harmful if swallowed. vapor harmful. Keep out of reach of children & pets. Read additional cautions on back panel. Contains Sodium Hydrosulfite and Sodium Metabisulfite. Avoid contact with eyes, skin and mucous membranes. Do not take internally. Use with adequate ventilation. Avoid breathing dust and vapors, especially after mixing with water. Wear rubber gloves when using this product. Mix in adequate open container to avoid spills or bursting. Do not mix with any other household cleaners or chemicals as fumes may be harmful if inhaled. Persons with respiratory problems (i.e. asthma) or sulfite sensitivity should not use this product since the vapors may result in breathing difficulty.

Additional info

Directions: Read entire label before using. Always pre-test in an inconspicuous area. For stubborn stains, increase dosage and/or contact time. Tubs, Sinks, Tile: 1. Wet area to be cleaned. 2. Apply powder to damp sponge or cloth. 3. Rub lightly until stains are gone. Rinse. Note: Not recommended for older, worn, or chipped porcelain cast iron fixtures. Toilet Bowl & Water Tank: Remove cleaners or deodorant from bowl or tank. Flush. Bowl: 1. Add 1/2 cup to water in bowl. 2. Scrub stained area with brush. 3. Let stand until stains are gone. Flush. Tank: 1. Rinse water level above stain line if possible. 2. Add 1/2 cup. 3. Let stand overnight or until stains are gone. Water Softener: All softeners on iron-bearing water require Iron out as preventative maintenance and to eliminate iron buildup. First Application: 1. Dissolve 1 cup in 1/2 gal. cold water. 2. Pour directly into brine well (for softeners with no brine well, pour directly into salt tank when salt level is low). 3. Manually regenerate softener. Repeat for heavily fouled unit. Regular Use: 1. Add 1/4 cup per 40 lbs. of salt. 2. Layer for continuous treatment. Cabinet models use for periodic cleaning only. Follow first application instructions above. Note: If taste or odor is detected in tap water, manually regenerate softener, then run cold water until odor is gone. White Laundry & Fabrics/Laundry with Color or Embroidery: Note: Do not use with peroxide, bleach, bleach-detergents, oxi-stain removers or oxi-detergents. Whites: 1. Add 1/2 cup to warm water as washer is filling (for front loading machines add to the detergent drawer). 2. Add clothes and let soak for 5 minutes (if possible, with soak cycle or by stopping machine). 3. Add detergent and resume wash/rinse cycle. 4. Dry as usual. Colors Test all colors before using. Use only on colorfast dyes. Note: Wash each item separately using the white clothes instructions. Caution: Product may irreparably damage colors and embroidered logos. Dishes, Glass, Plasticware: 1. Dissolve 1/3 cup in 1 gal. of warm water. 2. Soak articles 5 min., or until stains are gone. 3. Rinse thoroughly. Repeat as needed. Dishwasher/Washing Machine: 1. Add 1/2 cup to empty machine. 2. Run machine through normal cycle using water only. Repeat as needed. Note: Do not open machine mid-cycle. Exterior Surfaces: 1. Mix 1 cup into 1 gal. warm water. 2. Wet surface with clear water. 3. Apply with brush or sponge. 4. Keep saturated until stains are gone. Rinse. Note: Avoid contact with vegetation. Storage/Disposal: Store in original container and reseal after each use. Store in dry place. Do not reuse container.