Gorilla Construction Adhesive, Heavy Duty, All Purpose

Product details

100% waterproof. Great for small projects. Incredibly strong. Projects & repairs. Indoor & outdoor al-weather. Holds in 30 seconds fast grab. Paintable. Non-foaming formula. This tough, all-weather formula provides a long lasting and heavy duty bond without the limitations of other construction adhesives. Coverage: 13 lin. ft. using 3/16 inch bead. Paintable: In 1 hour best within 2 days of application. Construction Adhesive VOC: less than 2%. Contains phthalates and quartz silica bound in a polymer matrix. All surface. All purpose (Not recommended for use on polypropylene, polyethylene, bitumen or similar materials). Tub & tile; Mirrors; Flag brackets; Wood; Landscaping; Laminate repairs; Brick & stone; Water features; Floor transitions; Vinyl cove base; Fencing; Trim; Concrete; Plastic (Not recommended for use on polypropylene, polyethylene, bitumen or similar materials); Gutters; Granite/marble; Soap dishes; Foamboard; Towel racks; Brick; Aluminum; Fiberglass; Painted surfaces; And more! Meets ASTM C557, ASTM D3498 and AF6-01 specifications. www.gorillatough.com. 1-800-966-3458; www.gorillatough.com. Made in USA domestic & imported materials.

Warning

Warning: Cancer and Reproductive Harm - www.P65Warmings.ca.gov.,First Aid Treatment: If in eyes or on skin, rinse well with water for at least 15 minutes. If on clothes, remove clothes. If breathed in, move person into fresh air. If swallowed, call a Poison on Control Center or doctor immediately. Do not induce vomiting for medical emergencies only, call 800-426-7186.,Caution: May irritate eyes, skin or respiratory tract. Read cautions on back pane. Caution: Irritant. May be harmful if swallowed or inhaled. Read cautions on back panel. Caution: Irritant may irritate eyes, skin or respiratory tract contents may be harmful if swallowed or inhaled. Do not breathe fumes. Do not get in eyes or on skin or clothing. Do not swallow. Handle with care. Use only in a well-ventilated area or wear a mask. Wear protective clothing including gloves. Wash hands thoroughly after handling. Methanol may be released during cure Store in a cool, dry area. Do not reuse container. Keep out of reach of children.

Additional info

Directions: All surfaces should be clean and free of dirt, grease and oil. Best if used above 40 degrees F. 1. Unscrew cap, fold and screw-on nozzle. Cut to desired bead size. 2. Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps. 3. Within 10 minutes, press surfaces together and hold for 20-60 seconds. Note: Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors. Cure Time: 24 hrs. Minimum. Cure times will increase with lower temperature, humidity and if bonding non-porous surfaces. Clean-Up: Wipe wet glue off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer's instructions. Storage: Replace cap tightly to prevent material from curing. Store in a cool, dry location. To reuse nozzle, wipe out after use with a dry cloth. Remove remaining adhesive from nozzle once cured. Store away from children and animals.