This is the main content.
Command Medium & Large Water Resistant Bath Refill Strips
Command Medium & Large Water Resistant Bath Refill Strips
{{ slotProps.actionTitle }}
Product details Medium Holds: 3 lb (1.3 kg); Large Holds: 5 lb (2.2 kg). 2 M/M; 4 L/G. Damage-free hanging. Holds strongly; Remove cleanly. Proven to hold better than suction cups. Water resistant. Limited warranty and limitation of liability [for product sold in USA]: This product will be free from manufacturing defects. Il defective, your exclusive remedy shall be, at 3Ms option, product replacement or refund 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special incidental or consequential command.com Visit command.com for the strip holding power for your product. Strips made in USA with globally sourced materials.

Warning

Failure to follow instructions carefully may cause damage. Save instructions or visit command.com. Caution: Do not hang over beds or wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15 degrees-125 degrees F.
Additional info
Apply: 1. Choose a location where strips are not over grout lines. 2. Clean surface with rubbing alcohol. Do not use household cleaners. 3. Remove blue liner. Press adhesive to hook. 4. Remove black liner. Press to wall for 10 seconds. 5. To ensure adhesive hold, slide hook up and off. 6. Press base firmly for 30 seconds. 7. Use shower once and wait 24 hours to allow adhesive to build. 8. Slide hook on to mounting base. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 15 inches to release.