Directions

Failure to follow instructions carefully may cause damage. Save instructions or visit command.com. Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Remove red liner. Press adhesive to hook. 3. Remove black liner. Press to wall for 10 seconds. 4. To ensure adhesive hold, slide hook up and off. 5. Press base firmly for 30 seconds. 6. Slide hook back on. Wait 1 hour before use. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 12 inches to release.